View LA35-NP06_379008.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Current Transducer LA 35-NP
For the electronic measurement of currents : DC, AC, pulsed, mixed, with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).
IPN = 7-8-11-17-35 A
16136
Electrical data
IPN IP RM Primary nominal r.m.s. current Primary current, measuring range Measuring resistance with 15 V ISN KN VC IC Vd Vb @ 35 At @ 70 At
max max
35 1) 0 .. 70 RM min RM max 60 60 150 85
At At
Features
* Closed loop (compensated) multirange current transducer using the Hall effect * Printed circuit board mounting * Insulated plastic case recognized according to UL 94-V0.
Secondary nominal r.m.s. current Conversion ratio Supply voltage ( 5 %) Current consumption R.m.s. voltage for AC isolation test, 50 Hz, 1 mn R.m.s. rated voltage 2), safe separation basic isolation
35 mA 1-2-3-4-5 : 1000 15 V 10 + IS mA 2.5 kV 600 V 1700 V
Advantages
* * * * * * *
Excellent accuracy Very good linearity Low temperature drift Optimized response time Wide frequency bandwidth No insertion losses High immunity to external interference * Current overload capability.
Accuracy - Dynamic performance data
X
L
Typical accuracy @ IPN, TA = 25C Linearity
0.5 < 0.2
% % mA mA mA s A/s kHz
IO IOM IOT tr di/dt f
Typ Max Offset current 3) @ IP = 0, TA = 25C 0.10 0.20 Residual current 4) @ IP = 0, after an overload of 3 x IPN 0.05 0.15 Thermal drift of IO - 25C .. + 70C 0.15 0.50 Response time 5) @ 90 % of IPN di/dt accurately followed Frequency bandwidth (- 1 dB) <1 > 50 DC .. 150
Applications
* AC variable speed drives and servo
motor drives
General data
TA TS RP RS R IS m Ambient operating temperature Ambient storage temperature Primary resistance per turn @ TA = 25C Secondary coil resistance @ TA = 70C Isolation resistance @ 500 V, TA = 25C Mass Standards - 25 .. + 70 C - 40 .. + 85 C < 1.25 m 80 > 1500 M 22 g EN 50178 : 1997
* Static converters for DC motor drives * Battery supplied applications * Uninterruptible Power Supplies
(UPS)
* Switched Mode Power Supplies
(SMPS)
* Power supplies for welding
applications.
Notes :
1)
2) 3) 4) 5)
In order to avoid over-heating, it is necessary that the recommended primary connections be followed (see table page 2). Pollution class 2 Measurement carried out after 15 mn functioning The result of the coercive field of the magnetic circuit With a di/dt of 100 A/s. 060719/4
LEM Components
w w w .lem.com
Dimensions LA 35-NP
(in mm. 1 mm = 0.0394 inch)
Model + SP N Date code
Bottom view
Right view Connection
IN OUT
Top view
Back view
Number of primary turns
Primary current nominal maximum
Nominal output current
Turns ratio
Primary resistance
Primary insertion inductance
Recommended connections
IPN [ A ] 35
IP
[A]
ISN
[ mA ]
KN 1 / 1000
RP
[ m ]
LP 0.023
[ H ]
54321 IN
1
70
35
0.3
OUT
6 7 8 9 10 54321 IN
2
17
34
34
2 / 1000
1.1
0.09
OUT 6 7 8 9 10 54321 IN
3
11
22
33
3 / 1000
2.5
0.21
OUT 6 7 8 9 10 54321 IN
4
8
16
32
4 / 1000
4.4
0.37
OUT 6 7 8 9 10 54321 IN
5
7
14
35
5 / 1000
6.3
0.58
OUT 6 7 8 9 10
Mechanical characteristics
* * * *
General tolerance Fastening & connection of primary Fastening & connection of secondary Recommended PCB hole 0.2 mm 10 pins 0.7 x 0.6 mm 3 pins 1 mm 1.2 mm
Remarks
* IS is positive when IP flows from terminals 1, 2, 3, 4, 5 to
terminals 10, 9, 8, 7, 6
* This is a standard model. For different versions (supply
voltages, turns ratios, unidirectional measurements...), please contact us.
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.

▲Up To Search▲

Price & Availability of LA35-NP06

	To Download LA35-NP06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .